Access Control
STAND ALONE SYSTEMS
EASYMINI-
Miniaturised proximity reader with inbuilt relay. Any enrolled tag or badge presented
to the reader will activates a relay (solid state) The output relay of the reader
can be either impulsive or bistable The device's IP67 reader (with resinate electronics)
can be used externally and accomidates up to 50 different cards or tags. Miniaturised,
50 users, range 3-6 cm, 1 relay output 2 A, two-colour warning light + buzzer,
magnetic tamper, ABS box IP67 and 1m cable.
EASYPL-
Access control unit with backlite keypad (red), suitable for external applications
(resinate electronics) controls up to 500 users using 4 digit codes. Backlite,
2 relay outputs 5A, 2 two-colour warning LED + buzzer, optical tamper, ABS box
and 1m cable.
EASYBKA-
Vandal-proof access control unit with blue backlite keypad, suitable for external
applications (resinate electronics) controls up to 500 users using 4 figure codes.
Vandal-proof, backlite, 2 output relays 5A, 2 two-colour warning LED + buzzer,
optical tamper, selectable thermal heating, zama housing with 1m cable.
CONTROL UNITS
EASY 200-
Simplifi ed control unit, normally used on a door, gate, automation etc., to guarantee
controlled access through the recognition of enabled cards. EASY200 accepts data coming from a reader in Wiegand format (default Wiegand
30 bit). Although it is very small, it can directly control an electric lock, thanks to its integrated relay with 5A contact capacity and manages an internal memory of 250 different user codes. 250 users, 1 input for reader, 1 relay output 5A, code self-learning function, single code management both manual and with GTSYSTEMXP terminal, user memory management using GTSYSTEMXP and WINGTSYSTEM, ABS box.
M1000E-
Access Control Unit fi tted with 1 input for 1 external reader Using the 4 button
keypad and 3 digit display, new codes can be programmed in memory (a radio transmission
for RF or via the connected reader cards or tags). Canceling single codes or
all the codes, set the relay activation mode and time, setting a password is
all accomplished via a simple sequence via the 4 button. 999 users, 1 input for
reader, activated through reader or remote control 433.920 MHz, 1 relay output
5A, 433.920 MHz receiver integrated for radio transmitters, integrated keypad
for programming, users memory management with GTSYSTEMXP and WINGTSYSTEM, ABS
box for internal use or DIN rail mountable, REX button input.
M2000PE-
Access control unit fi tted with 2 inputs for external readers M2000PE has the same functions as the M1000E control unit , with the addition of separate relay control and adjustable times for each relay., memory partitioning and antipassback. The
M2000PE has an inbuilt 22 channel 433MHZ receiver which may be set to receiver channels 1 to 4. The unit also offers a transfer facility to allow transfer of programmed data to another M2000PE control unit connected through a RS485 serial line. 2000 users, 2 inputs for reader + RF input (parallel output), 2 relay outputs 5A, activated with readers or remote controls 433.920 MHz, 433.920 MHz receiver integrated for radio transmitter, integrated keypad for programming, users memory management with GTSYSTEMXP WINGTSYSTEM, ABS box for internal use on DIN rail, REX inputs for both doors.
TID3000-
TTD3000 is an access control terminal with keypad and display featuring dual creditial input (PIN code + proximity card). TTD3000 can control two passageways and two readers and may be as a stand alone unit or connected to a PC via SWAMIGO access control software; which may in turn be connected to existing or additional M, MT, and TTD series of control units. Reader protocols include Wiegand 26, 30 (default), 37 bit formats all of which can be customised if required.. The system communicates through the RS485 interface, using the same protocol as the M, MT, TTD, series control units, whch may be adapted by system integrators or developers if a personalised
access control software is needed. Depending on programming ,inputs and outputs may be managed to trigger mulitiple alarm signals (break-in, door open, time etc.) 3000 users, 2 inputs for readers, 1000 events off-line, 2 relay outputs 5A, 1 integrated proximity reader for memorising badges or tags, integrated keypad and display for programming, ABS box.
MT4000/2-
MT4000/2, is an evolution of M3000, is an access control unit capable of managing up to 4000 users with an off-line event memory buffer of 2000 events. It incorporates 2 inputs for readers and 2 main relay outputs as well as 2 auxiliary inputs and 2 auxiliary outputs.
The system is programmed via SWAMIGO management software to control badge assignment ,user groups: -entries in time slots, -limited number entries, -temporary validity of the badge. To manage more entries MT4000/2 can be connected to other MT and TTD series control units (network of control units). 4000 users, 2 inputs for readers, 2000 events off-line, 2 relay output 5A, code self learning function, ABS box.
MT10000/4-
MT10000/4, is an evolution of M5000; capable of managing access for up to 10000 users with an off-line events memory buffer of 16000 events, the MT10000/4 incorporates 4 reader imputs and 4 main relay outputs and 4 auxiliary inputs and outputs relays. Using the SWAMIGO management software the system can be confi gured to limit access to user groups: . assign time slots . control the number
of entries (or uses). provide temporary access of badge or PIN. Where more then 4 entries are required the MT4000/2 form part of an M, MT or TTD controller network- . assign time slots, . control the number of entries (or uses), . provide temporary access of badge or PIN.
Where more then 4 entries are required the MT4000/2 form part of an M, MT or TTD controller network. 10000 users, 4 inputs for readers, 16000 events off-line, 4 relay output 5A, Auto learning for badges, ABS box.
ACCESSORIES
ALV3V8A3-
Switch mode power pack with battery charger for back-up battery,overload protection, short circuits and reverse polarity protection (for battery) for use with M, MT, and TTD series access control units.
INT485C-
The INT485C interface is designed for a connection between the PC and M, MT;
TTD series control units, as well as the connection between the PC and the M1000E,
M2000PE control unit. The INT485C interface converts RS232 format to RS485 format
and vice versa. The characteristics of the RS485 bus allows transmission of data
up to a distance of 1000m.
INT485M-
The INT485M interface is designed to make a connection between a modem and the M, MT, TTD access control systems.
INTETHERNET-
Interface for connecting access control units (TTD3000, MT4000/2, MT10000/4) with Ethernet network.
MDM20-
Modem US Robotics analogical 56K for M, MT, TTD series access control units.
M5000P-
Communication protocol for M, MT, TTD series control units (CD Rom + instructions complete with SWAMIGO software l for modifying the software.
READERS AND KEYS
MPROXMINI and MEDIPROX-
MPROXMINI & MEDIPROX are proximity readers with both Wiegand or clock and data format. Compatible with all Prastel access control units that accept the Weigand 26/30 bit or dataclock protocol (transmission on specified cable should not excedd 100m). All the electronic components and the internal antenna are assembled in a completely resinated and self contained so as to offer a high degree of weather resistence (IP67). Characteristics common to both readers: proximity reader technology 125 KHz, Prastel badge reader, two-colour LED + buzzer, ABS box IP67, resinate electronics, 1 m cable. MPROXMINI - avge reading distance, 3/6 cm. MEDIPROX -avge reading distance 6/8 cm.
MPROXUNI and MEDIPROXUNI-
Multi-protocol proximity reader compatible with many other manufacture protocols
as well as Prastel's own 30 bit. Characteristics common to both readers: multi-protocol,
proximity reader technology 125 KHz, two-colour LED red and green + buzzer, ABS
box IP67, resinate electronics, 1 m cable. MPROXUNI- avge reading distance 3/6
cm MEDIPROXUNI avge reading distance 6/8 cm.
FORCE55-
Metallic and Perspex vandal-proof box, flush mounting, for MPROXMINI, MPROXUNI, EASYMINI readers.
MRMAGAND MRMAGINOX-
The MRMAG and MRMAGINOX readers of magnetic cards read the card information is coded onto track 2 in accordance with the ISO standards and is in CLOCK and DATA and CLS (the latter only for MRMAG) protocols. MRMAG uses the MW30 converter, supplied with the reader, the signals are converted in the Wiegand 30 bit format compatible with all the Prastel access control units and with all the systems that accept this data format. Characteristics common to both readers: magnetic strip in ISO 7811 2 track, Reading mode: F2F (FM), Card insertion speed 125 - 1250 mm/s. MRMAG - MW30 converter included, average life of reading head > 300.000 readings. MRMAGINOX -vandal-proof stainless steel box, red and green two colour LED + buzzer, average life reading head > 1.000.000 readings.
EASYBKW-
EASYBKW is a vandal-proof keypad reader. The output in Wiegand (default Wiegand
30 bit) format allows the connection to the major part of the access control
units present on the market. Blue illumination selectable, data output Wiegand
/ Data clock, intensive use, box in Zama, vandal-proof, resinate electronics.
ML2-
ML2 is a key contact reader MCR20. It is compatible with all the Prastel access
control units (Wiegand 30 bit) and with all the control units that accept this
protocol. Red/green warning light, 1 Wiegand 30 bit output, reading head in stainless
steel, ABS box.
MRRE-
The MRRE radio receiver is suitable to be connected to access control units.
The code received from a transmitter is converted into a format compatible with
the major part of the control units. This format can be selected using a dipswitch.
Transmitter channel address, output protocol Wiegand 26/30/37, Dataclock, TTL,
RS232, frequency 433,920 MHz, 24 bit digital code.
MDPTPROX-
The 2-channel transmitter MDT2PROX equipped with dual technology, radio 433.920
MHz + proximity, which allows the remote activation of an automation via a radio
receiver or access through other passageways using the MPROXMINI type proximity
reader. Common characteristics: frequency 433.920 MHz, ROLLING safety code, remote
self learning function on receiver.
