Control Units for Gates


UNIK1E AND UNIK2 E-
Self-learning control unit, 12 Vdc, with built-in 433.92 MHz receiver. UNIK control
units are available as board only (no housing or transformer), UNIK1ESK and UNIK2ESK),
are supplied with a housing and 100 VA transformer (UNIK1E and UNIK2E), are supplied
with a housing, transformer and built-in emergency battery (UNIK1E/B and UNIK2E/B).

UNIK1E230, UNIK2E230 (image not shown)AND UNIKBOXES-
Self-learning control unit, 230 VAC, with built-in 433.92 MHz receiver, with box and 10 VA transformer (UNIK1E230), 40 VA separate (UNIK2E230). 230V UNIK control units are available in board only format with builtin transformer (UNIK1E230SK), and board only without transformer UNIK2E230SK). Self-learning control unit, 230 VAC, with built-in 433.92 MHz receiver, 10 VA transformer, for overhead swing and sectional doors, board only.

SE9 6-
Basic unit which transforms inversion commands from 230 VACto 24 VDC. STOP command
management, particularly recommended for managing simple automations such as
shutters or blinds, 1 accessory power output (e.g. photocell, radio receiver),
STOP command management, ABS box for external use.

SERIOMRE-
Control unit with built-in 433.92 MHz radio receiver, with Stop input and single-step
operating mode. 50 users memory, built-in 433.92 MHz radio receiver, open/stop/close
function, work time trimmer, ABS box for external use.

SER30E-
Advance control unit with built-in receiver, inputs for connecting safeties,
fl ashing light and limit switches, with single-step and automatic time-adjustable
closure operating modes. 50 users management, dip-switch settable functions,
work time storage, built-in 433.92 MHz radio receiver, 10 A relay, management
for Safety Devices, limit switch management, OPEN/CLOSE input, flashing light
output, ABS box for external use.

EUROTREBP-
EUROTREBP is a control unit for a 230/400V 2HP three-phase motor for industrial
automations. It comprises a control logic board (EUROTRESK),and power board housed
in an ABS box. The digital programming and display simplify the setting of the
operating logics. Operating modes: manned, single-step, automatic limit switch
management even in manned mode, AUTOTEST function, safeties management in opening
and closure, molex fi tting for receivers (MPSRS2E), photocells (FT11SK), metal
detectors (MLX24SK), open, close, partial, emergency stop buttons, ON/OFF switch,
ABS IP65 box.