access control
STAND ALONE SYSTEMS
 |
EASYMINI Miniaturised proximity reader with inbuilt relay. Any enrolled tag or badge presented to the reader will activates a relay (solid state) The output relay of the reader can be either impulsive or bistable The device's IP67 reader (with resinate electronics) can be used externally and accomidates up to 50 different cards or tags. Miniaturised, 50 users, range 3-6 cm, 1 relay output 2 A, two-colour warning light + buzzer, magnetic tamper, ABS box IP67 and 1m cable. |
|
 |
EASYPL Access control unit with backlite keypad (red), suitable for external applications (resinate electronics) controls up to 500 users using 4 digit codes. Backlite, 2 relay outputs 5A, 2 two-colour warning LED + buzzer, optical tamper, ABS box and 1m cable. |
|
 |
EASYBKA Vandal-proof access control unit with blue backlite keypad, suitable for external applications (resinate electronics) controls up to 500 users using 4 fi gure codes. * vandal-proof * backlite * 2 output relays 5A * 2 two-colour warning LED + buzzer * optical tamper * selectable thermal heating * zama housing with 1 m cable |
|
 |
FINGERKEY Memory capacity 800 templates / 1600 fingerprints, Verification mode 1:1 or 1:N Identification modes Finger-prints only, PIN + finger-prints, PIN only Sensor Optical Risoluzione 500 DPI Output1 relay 3A/12VDC Output2 Wiegand 16/34 Power supply 12 Vdc Electrical input 150 mA Identification speed <= 2 second Wrong identification ratio <= 1 % Wrong authorization ratio <= 0.0001 % Signals 3 LED’s, keypad keybacklight, buzzer Dimensioni 166 x 90 x 31.6 mm |
CONTROL UNITS
 |
EASY 200 Simplified control unit, normally used on a door, gate, automation etc., to guarantee controlled access through the recognition of enabled cards. EASY200 accepts data coming from a reader in Wiegand format (default Wiegand 30 bit). Although it is very small, it can directly control an electric lock, thanks to its integrated relay with 5A contact capacity and manages an internal memory of 250 different user codes. 250 users, 1 input for reader, 1 relay output 5A, code self-learning function, single code management both manual and with GTSYSTEMXP terminal, user memory management using GTSYSTEMXP and WINGTSYSTEM, ABS box. |
|
 |
M1000E Access Control Unit fi tted with 1 input for 1 external reader Using the 4 button keypad and 3 digit display, new codes can be programmed in memory (a radio transmission for RF or via the connected reader cards or tags). Canceling single codes or all the codes, set the relay activation mode and time, setting a password is all accomplished via a simple sequence via the 4 button. 999 users, 1 input for reader, activated through reader or remote control 433.920 MHz, 1 relay output 5A, 433.920 MHz receiver integrated for radio transmitters, integrated keypad for programming, users memory management with GTSYSTEMXP and WINGTSYSTEM, ABS box for internal use or DIN rail mountable, REX button input. |
|
 |
M2000PE Access control unit fitted with 2 inputs for external readers M2000PE has the same functions as the M1000E control unit , with the addition of separate relay control and adjustable times for each relay., memory partitioning and antipassback. The M2000PE has an inbuilt 22 channel 433MHZ receiver which may be set to receiver channels 1 to 4. The unit also offers a transfer facility to allow transfer of programmed data to another M2000PE control unit connected through a RS485 serial line. 2000 users, 2 inputs for reader + RF input (parallel output), 2 relay outputs 5A, activated with readers or remote controls 433.920 MHz, 433.920 MHz receiver integrated for radio transmitter, integrated keypad for programming, users memory management with GTSYSTEMXP WINGTSYSTEM, ABS box for internal use on DIN rail, REX inputs for both doors. |
|
 |
TTD3000 is an access control terminal with keypad and display featuring dual creditial input (PIN code + proximity card). TTD3000 can control two passageways and two readers and may be as a stand alone unit or connected to a PC via SWAMIGO access control software; which may in turn be connected to existing or additional M, MT, and TTD series of control units. Reader protocols include Wiegand 26, 30 (default), 37 bit formats all of which can be customised if required.. The system communicates through the RS485 interface, using the same protocol as the M, MT, TTD, series control units, whch may be adapted by system integrators or developers if a personalised access control software is needed. Depending on programming ,inputs and outputs may be managed to trigger mulitiple alarm signals (break-in, door open, time etc.). | |
 |
MT4000/2, is an evolution of M3000, is an access control unit capable of managing up to 4000 users with an off-line event memory buffer of 2000 events. It incorporates 2 inputs for readers and 2 main relay outputs as well as 2 auxiliary inputs and 2 auxiliary outputs. The system is programmed via SWAMIGO management software to control badge assignment ,user groups: • entries in time slots • limited number entries • temporary validity of the badge To manage more entries MT4000/2 can be connected to other MT and TTD series control units (network of control units). * 4000 users – 2 readers connection * P CB only in ABS box * 2000 memory events * Antipassback systems * time slots – validity * pictures management etc.. * P c management through software * RS485 connection for networking up to 32 control boards |
|
 |
MT10000/4, is an evolution of M5000; capable of managing access for up to 10000 users with an off-line events memory buffer of 16000 events, the MT10000/4 incorporates 4 reader imputs and 4 main relay outputs and 4 auxiliary inputs and outputs relays. Using the SWAMIGO management software the system can be confi gured to limit access to user groups: • assign time slots • control the number of entries (or uses) • provide temporary access of badge or PIN Where more then 4 entries are required the MT4000/2 form part of an M, MT or TTD controller network. * 10000 users * 4 readers connection * P CB only in ABS box * 16000 memory events * Antipassback systems * time slots, validity, pictures management etc.. * P c management through software * RS485 connection for networking up to 32 control boards |
READERS AND KEYS
|
EASYBKW is a vandal-proof keypad reader
|
|
 |
FORCE 55 Metallic and Perspex vandal-proof box, flush mounting, for MPROXMINI, MPROXUNI, EASYMINI readers. |
|
 |
MPROXMINI & MEDIPROX are proximity readers with both Wiegand or clock and data format. Compatible with all Prastel access control units that accept the Weigand 26/30 bit or dataclock protocol (transmission on specifi ed cable should not excedd 100m). All the electronic components and the internal antenna are assembled in a completely resinated and self contained so as to offer a high degree of weather resistence (IP67).
|
|
|
MPROXUNI and MEDIPROXUNI, are multi-protocol proximity reader compatible with many other manufacture protocols as well as Prastel’s own 30 bit.
|
|
 |
ML2 is a key contact reader MCR20.
|
|
 |
MPROXMINI & MEDIPROX are proximity readers with both Wiegand or clock and data format. Compatible with all Prastel access control units that accept the Weigand 26/30 bit or dataclock protocol (transmission on specifi ed cable should not excedd 100m). All the electronic components and the internal antenna are assembled in a completely resinated and self contained so as to offer a high degree of weather resistence (IP67).
|
|
|
MPROXUNI and MEDIPROXUNI, are multi-protocol proximity reader compatible with many other manufacture protocols as well as Prastel’s own 30 bit.
|
|
 |
The 2-channel transmitter MDT2PROX equipped with dual technology, radio 433.920 MHz + proximity, which allows the remote activation of an automation via a radio receiver or access through other passageways using the MPROXMINI type proximity reader.
|
|
 |
|
|
 |
The MRMAG and MRMAGINOX readers of magnetic cards read the card information is coded onto track 2 in accordance with the ISO standards and is in CLOCK and DATA and CLS (the latter only for MRMAG) protocols. MRMAG uses the MW30 converter, supplied with the reader, the signals are converted in the Wiegand 30 bit format compatible with all the Prastel access control units and with all the systems that accept this data format. * magnetic strip in ISO 7811 2 track * Reading mode: F2F (FM) * Card insertion speed 125 - 1250 mm/s * MW30 converter included * average life of reading head > 300.000 readings |
|
 |
The MRMAG and MRMAGINOX readers of magnetic cards read the card information is coded onto track 2 in accordance with the ISO standards and is in CLOCK and DATA and CLS (the latter only for MRMAG) protocols.
|
|
 |
The MRRE radio receiver is suitable to be connected to access control units.
|