transmitters and receivers
433,920 mhz frequency
 |
AVANT Tuner for Two antaennas on a single receiver (2 inputs/1 output). Technical specifications Dimensions and weight 60 x 61 x 120 mm - 195g |
|
 |
ANT433AV Tuned Antenna 433.92 MHz, in vandal-proof box complete with 2.5 m cable Technical specifications Protection rating IP65 Dimensions and weight 50 x 95 x 25 mm - 150 g |
|
 |
ANT433S Ground plane Antenna 433.92 MHz, professional, complete with 2.5m. cable Dimensions and weight Stilo h.41 mm - 325 g |
|
 |
ANT433SD The ANT433SD antenna with Halo technology is specially designed and built with the aim of obtaining the best performance/price ratio for a 433.92 MHz frequency. Thanks to its innovatory form and its adjustable horizontal orientation (+/- 90°); it is suitable for installations where the antenna needs to be directed in the direction of activation of the transmitters. Made from plastic-covered vetronite, it gives a long life and high resistance to the elements. The antenna is fi tted with a coaxial cable with 75 Ohm impedance and a length of 2.5 m. |
|
 |
BFOR EASYROLL transmitters are equipped with the E.R.P.A. function (which allows a valid copy remote to be inserted in place of a lost or stolen unit). E.R.P.A. is the third evolution of PRASTEL’s Rolling code technology, allowing the insertion and simultaneous cancellation of a lost transmitter. In existing installations this easy to function to perform,simply pressing the transmit button on the copy remote (within 4-5 m of the receiver) enters the new remote into the system memory and removes the old transmitter. Once this simple operation has been performed, the new transmitter will be ready for use. multi-signal LED nominal range 100 m buttons in conductive rubber key-holder cord 2 - 4 channels (with 3 buttons) fl at battery warning on LED swivelling metal key-holder |
|
 |
MPSTF2E - MPSTF4E Multipass® transmitter 433.92 MHz, frontal buttons 2-4 channels. DIP-SWITCH CODE 1024 selectable codes metallic clip Technical specifications Power supply alkaline battery 12V Consumption 20 mA Dimensions and weight 35 x 80 x 12 mm - 45 g |
|
 |
MPSTL2E Multipass® 433.92 MHz transmitter lateral buttons 2 and 4 channels. UNIQUE EE-PROM SEQUENTIAL CODE 4 billion preset codes Technical specifications Power supply alkaline battery 12V Consumption 20 mA Dimensions and weight 75 x 38 x 15 mm - 48 g |
|
 |
MPSTP2EXP EASYROLL transmitters are equipped with the E.R.P.A. function (which allows a valid copy remote to be inserted in place of a lost or stolen unit). E.R.P.A. is the third evolution of PRASTEL’s Rolling code technology, allowing the insertion and simultaneous cancellation of a lost transmitter. In existing installations this easy to function to perform,simply pressing the transmit button on the copy remote (within 4-5 m of the receiver) enters the new remote into the system memory and removes the old transmitter. Once this simple operation has been performed, the new transmitter will be ready for use. |
|
 |
MR1EXP Single channel indoor Rolling Code receiver (may be set to receive Ch1,2,3 or 4). The receiver comprises the receiver and decoder for standard code, Rolling code and EASYROLL code receiver for up to 200 standard or EASYROLL transmitters. 1-channel rolling code receiver Technical specifications Power supply 12-24Vac/dc Consumption ave working/rest 40mA/22mA Types of relay output monostable, bistable Contact capacity 0,5 A @ 24 VAC/DC Operating temperature -20°/+55° C Protection rating IP44 Dimensions and weight 100 x 55 x 22 mm - 63 g |
|
 |
MRA2EXP External 433.92MHz 2-channel receiver with antenna and plug-in cable. Standard code, Rolling Code and EASYROLL control. Memory for up to 200 different codes EASYROLL or standard Prastel transmitters. 2-channel rollingcode receiver Antenna Technical specifications Power supply: 12-24Vac/dc Consumption ave working/rest: 40mA/22mA Types of relay output: monostable, bistable Contact capacity: 0,5 A @ 24 VAC/DC Operating temperature: -20°/+55° C Protection rating: IP55 Dimensions and weight: 77 x 80 x 38 mm - 197 g |
|
 |
MRBE200XP Like the MRBEXP the MRBE200XP is a base station capable of receiving channel 1 to 4. This unit is however supplied with a preset memory for 200 users. Memorising of up to 200 different codes generated by EASYROLL family or standard transmitters. Technical specifications Power supply: 12-24Vac/dc Consumption ave working/rest: 40mA/22mA Types of relay output: monostable, bistabie or timed Contact capacity: 0,5 A @ 24 VAC/DC Operating temperature: -20°/+55° C Protection rating: IP55 Dimensions and weight: 108 x 142 x 40 mm - 225 g |
|
 |
MRBEXP Flexible and modular the MRBEXP base Rolling Code Receiver comprises a receiver and decoder for standard code. Rolling code and EASYROLL code. Capable of memorising up to 1000 different transmitters the unit may be used as a 1,2,3 or 4 channel receiver depending on the application. Using prastel’s range of plug in module the relays outputs may be timed SKT, monostable SK3 or bistable .SK3RB. from 1 to 4-channel (through plug-in modu-less) rolling code receiver 200 or 1000 users memory optional plug-in module |
|
 |
MRS2E RM2-CHANNEL board Rolling Code 433.92 MHz Receiver, MOLEX connection for SER and EUROTRE control units. Memorising of up to 200 different codes generated by MULTIPASS family transmitters, either standard or Rolling code. Technical specifications Power supply 12-24Vac/dc Consumption avge working/rest 40mA/18mA Types of relay output Monostable, bistable and time delay Contact capacity 0,5 A @ 24 VAC/DC Operating temperature: -20/+55 °C Protection rating - Dimensions and weight 70 x 100 x 17 mm - 50 g |
|
|
MT2EXP - MT4EXP 433.92 MHz Rolling Code transmitter front buttons 2 or 4 channels. frequency 433.920 MHz ROLLING safety code remote self learning function on receiver Technical specifications Power supply 2 x 3 V, lithium batteries Consumption 80 mA Dimensions and weight 37 x 75 x 10 mm - 35 g |
|
 |
RADIOKEYB 4 channel 433.920 MHz numeric keypad with batter power supply for radio transmission of codes of a fi xed length of 5 digits, even selectable from the keypad. RADIOKEYB is envisaged for all those cases where a device (automation, lights etc.) must be activated by more than one individual code. No wiring is necessary for the keypad installation and it can be used externally (it is protected from the rain). The front cover, in semi-transparent conductive rubber, is fi xed with screws and illuminated with LEDs. PIN CODE 5 BIT Anti break-in electronic container: access to the electronics does allow the activation of the command |
|
 |
KIT3 RKit consisting of 3 x 2-channel transmitters MPSTF2E and 1 receiver RX1E (1-channel) |
|
|
Linkcare gates presents Prastel automation product
|
RKIT3R Kit consisting of 3 x 2-channel transmitters MT2E and 1 receiver RX1E (1-channel) |
|
 |
RX1E 1-CHANNEL Rolling Code 433.92 MHz Receiver, INTERNAL. Memorising of up to 50 different codes generated by MULTIPASS family transmitters, either standard or Rolling code |
|
 |
WT2E 2-channel transmitter 433.92 MHz, with battery power supply frontal buttons wall mounting, compatible with all the Prastel line of receivers. Wall-mounted or 503 Ticino cases |
40,685 mhz frequency
 |
ANT40,6 Antenna 40.685 MHz, professional, complete with 2.5m cable |
|
 |
ANTFK4 Tuned Antenna 40,685 MHz, complete with 2.5m cable |
|
|
DECM4M 4 channel Decoding board to increase the reception channels on all receivers MULTIPASS and EASYROLL series. Technical specifications Power supply 12-24Vac/dc Avge Consumption avge work/rest 40mA/22mA N° memorisable codes rom 50 to 1000 (with MM – LOGIC – M/R series memory modules) N. channels 4 (with SK3 series additional modules) Types of output monostable, bistable and time delay Output relay Contact capacity 0,5 A @ 24 Vac/dc Signals red LED Operating temperature -20/+55 °C Protection rating IP55 Dimensions and weight 100 x 55 x 22 mm - 70 g |
|
 |
M200R - M1000R Extractable Memory modules for MRB-MRBE, 200 and 1000 codes that allow a complete control, with password of user codes |
|
|
MPSTL2 - MPSTL4 Multipass 40.685 MHz transmitter, UNIQUE CODE EE-PROM, 4 billion preset codes, lateral buttons, 2 and 4 channels. |
|
|
MRA2 Receiver 2-CHANNEL MULTIPASS 40.685 MHz, COMPLETE WITH ANTENNA AND PLUG IN CABLE. * memorising of up to 200 different codes generated by MULTIPASS® family transmitters. * pre-assembled * ABS box for external use Technical specifications Power supply: 12-24Vac/dc Consumption avge working/rest: 45mA/22mA Types of relay output: monostable, bistable Contact capacity: 0,5 A @ 24 VAC/DC Operating temperature: -20/+55 °C Protection rating: IP44 Dimensions and weight: 77 x 80 x 38 mm - 250 g |
|
|
MRB Modular base Receiver MRB integrates the functions of receiver and standard code decoder. Capable of memorising of up to 1000 different codes generated by MULTIPASS ® family transmitters. * Memorising of up to 1000 different codes generated by MULTIPASS® family transmitters. * 1 to 4 channels outputs with SK3 boards * ABS box for external use |
|
 |
SK3 - SK3RB - SK3T Channel modules for relay outputs on MRB, MRBEXP series receivers. |
26,9-29,7-30,8306 Mhz frequency
|
ANTFK2 - ANTFK3 - ANTFS1 Tuned Antenna complete with 2.5 m cable |
|
 |
DECM4 Decoding board 4 channels to increase the channels of the LINK43RB receiver. Configuration table antenna/range Transmitter with: Range Receiver with: ANT43 1000-3000 m ANT43 ANT43 1000-4000 m ANT43S ANT43S 3000-6000 m ANT43 ANT43S 4000-10000 m ANT43S |
|
|
KMFRB1 - KMFRB193 - NCSMRB1 Modular base Receiver from 1 to 4 channels. Memorising of up to 1024 different codes generated by KM and NCSM family transmitters. ABS box for external use Technical specifications KMF NCSM Power supply: 12-24Vac/dc 12-24Vac/dc Consumption avge: 1 VA 1 VA Types of relay output: Monostable, bistable time delay Contact capacity: 1 A @ 24 VAC/DC 1 A @ 24 VAC/DC Operating temperature: -20°/+55° C -20°/+55° C Dimensions and weight: 108 x 142 x 40 mm - 225 g 108 x 142 x 40 mm-225 g |
|
 |
KMFT2P - KMFT2P93 - NCSMT2P Dip-switch transmitter; 2 channels, 1024 selectable codes lateral buttons. metal clip, ABS box, led Technical specifications Power supply alkaline battery 12V Absorption 20 mA Dimensions and weight 35 x 80 x 12 mm - 45 g |
|
|
KMFT4P - KMFT4P93 _ NCSMT4P Dip-switch transmitter; 4 channels, 1024 selectable codes lateral buttons. metal clip, ABS box, led Technical specifications Power supply: alkaline battery 12V Absorption: 20 mA Dimensions and weight: 35 x 80 x 12 mm - 45 g |
|
 |
SK1 - SKRB - SKT Channel modules for relay outputs on LINK43RB series receivers. Technical specifications Contact capacity 1 A @ 24 Vdc Dimensions and weight 35 x 25 x 14 mm - 20 g |