Transmitters & Receivers

EASY ROLL

BFOR-

New Rolling Code transmitter, EASYROLL code control. 2 - 4 channels (with 3 buttons), flat battery warning on LED, swivelling metal key-holder.

MPSTPEXP-

Rolling Code Transmitter EASYROLL code control. MPSTP2EXP can be programmed via radio (proximity) without opening the package. Sequential codes, 2 channels, battery safe function, battery saving function, blister packaging.

MR1EXP

MR1EXP-

Single channel indoor Rolling Code receiver (may be set to receive Ch1,2,3 or 4),The receiver comprises the receiver and decoder for standard code, Rolling code and EASYROLL code, receiver for up to 200 standard or EASYROLL transmitters.

MRA2EXP

MRA2EXP-

External 433.92MHz 2-channel receiver with antenna and plug-in cable. Standard code, Rolling Code and EASYROLL control. Memory for up to 200 different codes EASYROLL or standard Prastel transmitters.

M200RXP/M1000RXP-

Extractable resinate memory modules for MRBEXP with 200 and 1000 codes that give a complete control of user codes with password.

SK3/SKERB/SKT-

Channel modules for relay outputs on MRB, MRBE and MRBE200XP series receivers.

DECM4M

DECM4M-

4 channel Decoding board to increase the reception channels on all receivers MULTIPASS and EASYROLL series.

RADIO CONTROLS 433,92 MHZ

MPSTL23/MPSTL234E-

Multipass 433.92 MHz transmitter lateral buttons 2 and 4 channels. UNIQUE EE-PROM SEQUENTIAL CODE, 4 billion preset codes.

MPSTF2E/MPSTF4E-

Multipass transmitter 433.92 MHz, frontal buttons 2-4 channels. DIP-SWITCH CODE, 1024 selectable codes, metallic clip.

RADIOKEYB-

transmission of codes of a fi xed length of 5 digits, even selectable from the keypad. RADIOKEYB is envisaged for all those cases where a device (automation, lights etc.) must be activated by more than one individual code. No wiring is necessary for the keypad installation and it can be used externally (it is protected from the rain). The front cover, in semi-transparent conductive rubber, is fi xed with screws and illuminated with LEDs. PIN CODE 5 BIT, Anti break-in electronic container: access to the electronics does allow the activation of the command.

WT2E

WT2E-

2-channel transmitter 433.92 MHz, with battery power supply frontal buttons wall mounting, compatible with all the Prastel line of receivers. Wall-mounted or 503 Ticino cases.

RADIO CONTROLS 433,

RX1E-

1-CHANNEL Rolling Code 433.92 MHz Receiver, INTERNAL. Memorising of up to 50 different codes generated by MULTIPASS family transmitters, either standard or Rolling code.

MRS2E

MRS2E-

2-CHANNEL board Rolling Code 433.92 MHz Receiver, MOLEX connection for SER and EUROTRE control units. Memorising of up to 200 different codes generated by MULTIPASS family transmitters, either standard or Rolling code.

RK1T3/RK1T3R-

Kit consisting of 3 x 2-channel transmitters MPSTF2E and 1 receiver RX1E (1-channel).Kit consisting of 3 x 2-channel transmitters MT2E and 1 receiver RX1E (1-channel).

ANTENNAS

ANT433AV-

Tuned Antenna 433.92 MHz, in vandal-proof box complete with 2.5 m cable.

ANT433S

ANT433S-

Ground plane Antenna 433.92 MHz, professional, complete with 2.5m. cable.

ANT433SD-

The ANT433SD antenna with Halo technology is specially designed and built with the aim of obtaining the best performance/price ratio for a 433.92 MHz frequency. Thanks to its innovatory form and its adjustable horizontal orientation (+/- 90); it is suitable for installations where the antenna needs to be directed in the direction of activation of the transmitters. Made from plastic-covered vetronite, it gives a long life and high resistance to the elements The antenna is fi tted with a coaxial cable with 75 Ohm impedance and a length of 2.5 m.

ACANT

ACANT-

Tuner for Two antennas on a single receiver (2 inputs / 1 output).

RADIO CONTROLS 40,685 MHZ

PSTL2/MPSTL4-

Multipass 40.685 MHz transmitter, UNIQUE CODE EE-PROM, 4 billion preset codes, lateral buttons, 2 and 4 channels.

MRA2

MRA2-

Receiver 2-CHANNEL MULTIPASS 40.685 MHz, COMPLETE WITH ANTENNA AND PLUG IN CABLE. Memorising of up to 200 different codes generated by MULTIPASS, Family transmitters. Pre-assembled, ABS box for external use.

MRB

MRB-

Modular base Receiver MRB integrates the functions of receiver and standard code decoder. Capable of memorising of up to 1000 different codes generated by MULTIPASS family transmitters. Memorising of up to 1000 different codes generated by MULTIPASS family transmitters. ,1 to 4 channels outputs with SK3 boards, ABS box for external use.

M200R/M1000R-

Extractable Memory modules for MRB-MRBE, 200 and 1000 codes that allow a complete control, with password of user codes.

SK3/SK3RB/SK37 -

Channel modules for relay outputs on MRB, MRBEXP series receivers.

ANT40/ANT406-

Antenna 40.685 MHz, professional, complete with 2.5m cable.

ANTFK4

ANTFK4-

Tuned Antenna 40,685 MHz, complete with 2.5m cable.

TRANSMITTERS AND RECEIVERS EXTRA CEE

MKFTT20/KMFTP93-

Dip-switch transmitter; 2 and 4 channels, 1024 selectable codes lateral buttons Metal clip, ABS box, LED.

NCSMT2P/NCSMT4P-

metal clip, ABS box, LED.

KMRB1/KMRB193/KCSMRB1-

Modular base Receiver from 1 to 4 channels. Memorising of up to 1024 different codes generated by KM and NCSM family transmitters. ABS box for external use.

SK1/SK1RB/SKT-

Channel modules for relay outputs on KM andNCSM series receivers.

ANTFK2/ANTFK3/ANTFK1-

Tuned Antenna complete with 2.5 m cable.

RADIO JUMPERS

LINK43T4/LINK43RB-

4-channel transmitter, 4W, 1024 combinations. LONG RANGE: 10 KM MAX, 24 work frequencies selectable with dip switches, Power limiter, autotest and supervision, PLL technology.

ANT43

ANT43-

Autotested modular Receiver 4 connections for channel module (SK channel modules).

A part of the Linkcare network